Best sellers

Inside the Motorised V8 Engine: eight pistons in plain sight

Transparent cylinder blocks of the Motorised V8 Engine lit by its LED module

The Motorised V8 Engine is made to be watched while it runs. It puts its moving parts behind clear walls: 664 pieces, two banks of transparent cylinder blocks and a motor that sets all eight pistons working at the flick of a switch.

How a V8 is laid out

A V8 sets its eight cylinders in two banks of four, angled towards each other and joined at the bottom by a single crankshaft. On this model, each bank sits under one of the two red valve covers, and the crankshaft between them turns the up and down movement of the pistons into rotation, the same principle as in a full-size engine.

Pistons you can watch

Each red valve cover sits on a transparent cylinder block, so the pistons and the crankshaft stay in view through the full cycle instead of disappearing into a solid casting. An LED light module glows through the block and lights the pistons from inside as they move, so the movement stays visible in a dark room.

Motorised V8 Engine brick model with red valve covers, silver exhausts and front pulleys

What drives it

The motor and battery box are part of the set and power a gear system that turns the crankshaft. Switch it on and the crankshaft drives all eight pistons through their cylinders, while the gears keep the whole assembly turning together. At the front, belts link grey pulleys with tan hubs to a black toothed gear set between the two red cylinder banks, with a large silver flywheel below them. Silver exhausts curve along both sides of the block.

How the build comes together

The parts arrive grouped by section, with a printed, illustrated manual that goes step by step. The build is rated Intermediate and takes about three to four hours. The motor, the battery box and the LED module are all included in the set.

Size on the shelf

Finished, the engine is 18.5 cm long, 17 cm wide and 14 cm tall, small enough for a desk or a narrow shelf. It stands on its own black support frame, so it needs no separate stand, and with its LED module it is also part of our light-up sets.

Motorised V8 Engine dimension drawing: 18.5 cm long, 17 cm wide and 14 cm tall

Good to know

  • Pieces: 664
  • Dimensions: 18.5 x 14 x 17 cm (7.3 x 5.5 x 6.7 in)
  • Difficulty: Intermediate, about 3 to 4 hours
  • Age: 8+
  • Moving parts: motor-driven crankshaft and eight pistons, LED light module
  • In the box: the engine, grouped by section; motor and battery box; LED light module; illustrated step-by-step manual; 24builds® Collector's Box

See the Motorised V8 Engine or explore the V8 engines collection.

Reading next

International Space Station brick model on its display stand in a dark studio

Leave a comment

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.