Best sellers

Satin purple from the wheels up: the British Aero Hypercar

Satin Purple Edition British Aero Hypercar brick model on a dark walnut shelf

The Satin Purple Edition of the British Aero Hypercar carries one colour all the way through: satin purple body panels, matching satin purple wheels and a black roof frame. It is 59 cm long at 1:8 scale and uses 3,568 pieces.

What 1:8 means on the shelf

At 1:8, every centimetre of the model stands for eight centimetres of a full-size car. That scale leaves room for working parts: doors that open, an engine you can reach, suspension and steering. It also means the car needs a shelf about 60 cm wide, and it lines up with the other models in our 1:8 scale collection.

Butterfly doors and a black cabin

Both butterfly doors rise wide above the sculpted purple nose and open up the black cabin with its yellow-green trim. The bonnet opens too. Printed detail pieces and a precision sticker set come in the box, and the raised rear wing and black roof frame give the car its track profile from the side.

Satin Purple Edition British Aero Hypercar brick model with both butterfly doors open

A V8 under the rear cover

The V8 sits behind the cabin, under the rear engine cover. Take the cover off to reach it: its pistons rotate and feed a functional transmission, so the engine is part of the mechanics rather than a static block. The modular chassis carries independent suspension with adjustable ride height, so you can set the car lower or higher on the shelf, and the steering works.

The airbrake at the back

The rear wing sits on twin stalks and rises as an airbrake. Below it, silver round outlets, a chequered strip and central exhausts fill the tail.

Static or remote controlled

The set comes as a static display model or with the remote-control upgrade. The remote-controlled version has the same set in the box plus an RC dynamic pack with drive motors, a 2.4G remote control and a battery system. The build is rated Advanced: plan on 12 to 16 hours, with the pieces pre-sorted in numbered bags and an illustrated step-by-step manual.

Good to know

  • Pieces: 3,568
  • Scale: 1:8
  • Dimensions: 59 x 15 x 28 cm (23.2 x 5.9 x 11 in)
  • Difficulty: Advanced, about 12 to 16 hours
  • Age: 16+
  • In the box: the car, pre-sorted in numbered bags; satin purple wheel set; precision sticker set and printed detail pieces; illustrated step-by-step manual; 24builds® Collector's Box. The remote-controlled version adds the RC dynamic pack.

See the Satin Purple Edition or explore supercars and hypercars.

Reading next

Rally Team Transport brick set with van, trailer and number 10 rally car in a dark garage
International Space Station brick model on its display stand in a dark studio

Leave a comment

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.